刷写方法--桌面下刷：
Upgrade Method: Downswipe the desktop：

关闭微软自带的病毒和威胁防护--解压缩到桌面--选择“HIDFirmwareUpgrad”右键管理员身份运行开始自动升级--进度条跑完弹出提示successfully或者OK，代表升级成功
Disable Microsoft virus and threat protection -- Unzip it to the desktop --> Select “HIDFirmwareUpgrad” and right-click as the administrator to start the automatic upgrade --> The progress bar displays a message indicating "successfully or OK", indicating that the upgrade is successful

升级完成（桌面软件即可删除），手动校准一下摇杆：
Update completed (the desktop software may be deleted). Please calibrate the joystick manually:

--1. 手柄默认状态 (Xbox360 手柄模式 ) 下，同时长按【Back】键 +【Start】键 5 秒左右 , 当键鼠切换灯常亮时松开 ;
--2. 先将左、右摇杆以最大倾斜角度轻轻地旋转 3 圈校准摇杆，再把左、右扳机键按到底 3 次校准马达；
--3. 按 Y 键退出校准模式，此时键鼠切换灯熄灭。
注意：①旋转摇杆需尽量放轻力度，旋转时请一直保持最大倾斜角度；②校准扳机键时请务必按压到底；③摇杆与扳机键校准步骤缺一不可。
--1.  handle's default state (Xbox360 handle mode), while long press the [Back] button + [Start] button for about 5 seconds,
they can be released when the Keyboard mouse switch light is always on.
--2. first let left and right joystick to the maximum tilt angle gently rotate 3 circles to calibrate the joystick, and then press the
left and right trigger buttons for 3 times to calibrate the motor;
--3. press the Y button to save and exit the calibration mode,at this time, Keyboard mouse switch light is off.
Attention: ①Rotate the joystick as lightly as possible, please keep the maximum tilt angle when rotating; ② Be sure to press the trigger button to the
bottom when calibrating; ③Both joystick and trigger calibration are necessary.